Customer portal help — for customers. Your scales and certificates, asking for service, reminders, and inviting colleagues.
Welcome
The customer portal is where you see the scales the company that services them looks after for you: when each was last calibrated, when it's next due, and every calibration certificate, ready to download. Depending on what the company has switched on, you can also ask for a service visit, get an email when scales come due, and invite colleagues.
Signing in
Open the portal address the company gave you (it ends in /portal/).
- First time: the company emails you an invitation. Click its link, choose a password (at least as long as the email or the page says, not all numbers, not like your name or email) and you're in. The email says how long the link works; if it has run out, use Forgot your password? with the same email, or ask the company to send it again.
- After that: sign in with your username (usually your email address) and password.
- Sign in with ERPNext: if the company's ERPNext customer portal has a link to calibration certificates, or the sign-in page shows Sign in with ERPNext, you can use your ERPNext account instead of a separate password.
- Forgot your password? Enter your email; if it has a portal account, a link to choose a new password arrives within a few minutes.
- Signed out after a while? The company can have the portal sign out when nobody has used it for a time. A minute before, it asks Still there?: click Stay signed in to carry on.
Your account only ever shows your own company's scales, and, if the company has limited you to some locations, only those.
Equipment health
If the company shows it, Equipment health at the top of Calibrations sums up how your scales stand after their last calibration: how many are in good shape, and which are out of tolerance, were adjusted, are worth keeping an eye on (close to their limit, in poor condition, or often out of tolerance on arrival) or couldn't be inspected, with how many are overdue or due in the next 30 days. Click a count to see those scales, what was found and their certificates; click a scale for its full history. It only counts calibrations the company has finished reviewing.
Calibrations (visits)
Calibrations is where the portal opens. It lists each finished service visit, newest first: the date, the location, how many scales were calibrated, and how they came out (passed, adjusted, failed, not inspected).
- Download all saves the whole visit as one .zip file: the Equipment Health Report, every certificate (PDF, and the digital certificate when there is one), any troubleshooting reports and any placed-in-service reports. Each certificate is exactly as issued, so its QR code still checks it. The button is greyed out for a few minutes while certificates are still being prepared.
- Health report saves just the Equipment Health Report for the visit.
- Click a visit to see each scale calibrated on it, with its result and certificate. Click a scale for its full history.
- If the visit had a task list (for example "Clean the pit"), the visit shows Work on this visit: each task and whether it was done.
- If the company shows them, a visit appears as soon as the technician finishes it, marked Preliminary: being reviewed. Each scale then has a Preliminary report: the readings as recorded on site, before the company's review. It isn't a calibration certificate. The approved certificate replaces it as soon as it's ready. A scale marked Being corrected had its preliminary report withdrawn; a corrected report will follow. Download all is ready once every certificate is approved.
Calibrations from before the portal's records (and each scale's due date) are under Equipment.
Your equipment
Equipment lists every scale and other device you can see, with:
| Column | Shows |
|---|---|
| Scale | Its name, make, model and serial number. Click it for its full history. |
| Location | Where it is, and where inside the location if recorded. |
| Last calibrated | The date of its last calibration and the result. |
| Next due | When it's next due, and Overdue, Due soon (within the company's due-soon days, usually 30) or Current. A scale not in service shows its status instead. |
| Certificate | PDF downloads the latest certificate. DCC downloads the digital calibration certificate (an XML file for software that reads them), when there is one. |
- The overdue and due in the next … days buttons at the top show just those scales; click again to show all.
- Search finds a scale by name, serial number or asset tag. With more than one location, pick one to see just its scales.
A scale's history
Click a scale to see its details (type, capacity, legal for trade, status). Once it has been calibrated twice, Error over time charts how far it read from each test load when it was found, as a share of what it's allowed: the shaded band is within tolerance, and a line moving toward its edge is a scale drifting. Below it is every calibration, newest first, each with its result, the technician and the certificate to download. Records from before the company used CertaCal show as Earlier record without a certificate. If a technician troubleshot the scale (found and repaired a fault), its troubleshooting reports are listed below the history, with a PDF of each.
On a scale's page, Open certificate shows its latest certificate, Download saves it, and DCC saves the digital certificate when there is one.
Scanning a scale's sticker
Each scale the company services carries a sticker with a QR code. To go straight to that scale in the portal:
- Sign in to the portal on your phone, and tap Scan a sticker (at the top of Calibrations and Equipment, and in the menu).
- Allow the portal to use the camera when the phone asks, and point it at the QR code on the scale's sticker, or on one of its certificates.
- The scale's page opens: when it's next due, its history and certificates, Open certificate, and Ask for service on this if Service requests is in your menu. Scan another goes back to the camera.
No sticker, or the camera won't open? Type the scale's ID, asset tag or serial number under the camera and tap Find the scale.
Only your own scales are found: a scale that belongs to someone else, or is at a location you don't see, shows This scale isn't on your account. Scanning the sticker with the phone's ordinary camera app opens the scale's public page instead (its last calibration and due date), as it does for anyone.
The portal on your home screen
You can keep the portal on your phone's home screen like an app:
- Android (Chrome): open the portal, tap the ⋮ menu and Install app (or Add to Home screen).
- iPhone or iPad (Safari): open the portal, tap Share and Add to Home Screen.
It opens straight to your equipment (the first time, you may need to sign in again). It needs a connection: the portal always shows what the company has on file now.
Placed-in-service reports
When a technician puts a commercial (legal-for-trade) device into service, repairs it or removes it, the company files a placed-in-service report with your county or state weights & measures office. Once it's filed it appears under Placed in service in the menu, on that visit and on each scale it covers, with the PDF exactly as the office received it. Keep them with your device records: an inspector may ask for them.
USDA Packers & Stockyards test reports
A scale used to buy or sell livestock, carcasses, live poultry or feed by weight is tested twice a year under the Packers & Stockyards Act, and each test is reported to USDA. This portal is where you get your copy of each report. Once the test report is complete it appears under USDA P&S reports in the menu, on that visit and on the scale's page, with the form (P&SP-4200, 4300, 4400 or 4500), the result and where it stands with USDA:
- Not yet sent to USDA: the report is complete and the company will send it; the PDF is the report as it stands.
- Sent to USDA (with the date) or Accepted by USDA: the PDF is exactly the copy USDA received.
- Returned by USDA for correction: the copy first sent stays here until the corrected one is sent.
PDF saves the report. Keep them with your scale records: the regulations require you to keep a copy of each test report.
Quotes
When the company sends you a quote, its email has a link to read it and answer, with no sign-in. In the portal, Quotes in the menu (once you have one) lists the quotes for your locations, with what each is for, its total, how long it's good for and where it stands.
Open a quote to read it (PDF saves it), then:
- Accept: type your name and title, sign in the box with your finger or mouse, tick I accept this quote and its terms, and click Accept the quote. The company is told at once, and starts the service agreement or schedules the work.
- Decline: say why, if you like, and click Decline the quote.
A quote can be answered once, until its Good until date. If the company sends a revised quote, the earlier one's link says it has been replaced: answer the new one. If the company has the online answer switched off, the portal shows its quotes to read, and you answer them by phone or email.
Asking for service
If Service requests is in the menu, you can ask the company for a visit:
- Click Ask for service (on Calibrations or Equipment), or Ask for service on this on a scale's page.
- Pick the location, and tick the scales it's about (optional).
- Say what you need: a calibration, a repair (what's wrong), a new scale installed.
- Pick a preferred date if you have one, and click Send request.
Service requests lists what you and your colleagues have asked for: Waiting for the office, Scheduled with the date, or Declined with the company's reason.
Due-date reminders
If the company has reminders on, you get an email when your scales come due for calibration, listing them. The company decides when: for example a month before, and again if a scale is overdue. To stop them, click the link at the bottom of any reminder, or switch Due-date reminders off under Account. You can switch them back on there at any time.
Account
Click your name at the bottom of the menu for Appearance: Light, Dark or Same as this device (follows your computer's or phone's own setting).
Account shows your name, email, username and locations, the reminders switch, and Change password. If you sign in with ERPNext, you can also set a password here to sign in to the portal directly.
Inviting colleagues
If the company has made you your company's portal administrator, People is in the menu:
- Invite someone: their name and email (an address at your own company's email domain), the locations they should see (yours, or some of them), and whether they can manage people too. They get an email to set their password. For anyone outside your email domain, ask the company.
- Can manage people and Access switch on or off for each person. Switching access off stops them signing in; their name stays on requests they made. Someone the company switched off shows Off (by the service company): only the company can switch them back on.
- Resend invitation for someone who hasn't set their password yet.
You can't change your own access; ask the company.
Your auditors
Your own auditors (a certification body, a customer's auditor, a regulator) can be given read-only access for a set time, with their own sign-in. Nobody gets a shared link: each auditor is invited by email and sets their own password, so you know who looked at what.
If you are your company's portal administrator, Auditors is in the menu:
- Invite an auditor (when the company that services your equipment allows it; otherwise ask them): their name and email, the last day of access (required, up to the limit the page shows), the locations, and optionally just some of your equipment (none ticked: every item at those locations). They get an email saying who invited them, what they can see and until when.
- An auditor sees the chosen equipment, each item's calibration history, its current and earlier certificates, amendments and the replaced copies, and the certificates of the test weights and standards used (with the company's accreditation, when the certificate was issued under one, and the accreditation body's certificate and scope in force on the calibration's date). They can't see visits, quotes or prices, ask for service, change reminders or invite anyone.
- Extend (or Reopen) changes the last day; End now stops their access at once; Resend sends the invitation again. The day after the last day, they can't sign in, and a page they already have open stops working.
- What your auditors opened lists every scale, certificate and standard's certificate an auditor opened, with who and when.
You can always end an auditor's access, even when only the company can invite them.
If you are the auditor
Sign in with the username and password from your invitation. Equipment lists what you may see (or Scan a sticker to go straight to an item, if it's one you may see); open an item for its calibration history, and Traceability and revisions under a certificate for its revisions, the standards used (each with its own certificate to download) and the accreditation, with the accreditation body's certificate of accreditation and scope as they stood on the calibration's date, to download. Everything is read-only, and what you open is recorded and shown to the customer. Your access ends after the day shown at the top of each page.
Help
Tolerance calculator in the menu opens the free Handbook 44 calculator in a new tab: what a scale of a given class and division is allowed at a test load.
For anything about your scales, visits or certificates, contact the company that services your scales.
Electronic signatures
If your records are kept under 21 CFR Part 11, each certificate shows who approved it electronically, when (with the time zone) and what the signature means. The company can give your auditor the audit trail of your calibrations, with every change, who made it, why, and the signatures.